팬톰/QA TOOL
Radiography, Fluoroscopy,Mommo,CT,MRI 용 다양한 팬톰을 구비하고 있으며 또한 해상력 차트/디지털 팬톰 등 엑스선 기기의 품질관리를 위한 Tool 등이 있습니다.
Pure.18 외 다수 팬톰
Model : PURE.18
* 이 팬톰은 간단하면서 사용하기에 효율적인 rountine medical imaging test phantom 입니다.
* 투시 시스템의 imaging performance 를 평가하기 위해 일상적으로 사용됩니다.
* Gray-scale을 체크하거나, Contrast detail의 수를 카운트하거나 line pattern을 확인만 하면 됩니다.
* 이러한 숫자들이 평상시와 달라지면 투시 장비의 이미지 질에 이상이 생겼음을 알수 있습니다.
** 아래 항목을 평가 합니다. **
1. Brightness and contrast adjustment : Cu for high light & Pb for low light details.
2. Circular Geometry check : scanning linearity.
3. Imaging contrast : 18 low-contrast and high-contrast details with contrast values
from 0.9 to 16.7% @70kVp 1mm Cu, 8mm diameter.
4. Resolution : 0.5 to 5.0 Line pairs/mm
5. Geometry and collimation check markings.
** Specification **
1. Diameter : 180 mm
2. Thickness 10 mm
고객의 요구에 따라 다른 FOV 사이즈와 다양한 디자인으로 공급할 수 있습니다.
** 납품 시 구성품**
1. 1mm high purity Cu attenuation filter for fitting to the diaphragm housing
2. Detailed user manual
3. Robust carrying case for easy transport.
** 규정 준수 **
1. IEC 61223-3-1
2. IPEM Report 91(2005) : Recommended standards for the Routine Performance Testing of Diagnostic X-ray imaging Systems
Published by the Institute of Physics and Engineering In Medicine.
Model : PURE.18 DIGITAL
* 이 팬톰은 간단하면서 사용하기에 효율적인 rountine medical imaging test phantom 입니다.
* Digital 투시 시스템의 imaging performance 를 평가하기 위해 일상적으로 사용됩니다.
* Gray-scale을 체크하거나, Contrast detail의 수를 카운트하거나 line pattern을 확인만 하면 됩니다.
* 이러한 숫자들이 평상시와 달라지면 투시 장비의 이미지 질에 이상이 생겼음을 알수 있습니다.
** 아래 항목을 평가 합니다. **
1. Brightness and contrast adjustment : Cu for high light & Pb for low light details.
2. Circular Geometry check : scanning linearity.
3. Imaging contrast : 18 low-contrast and high-contrast details with contrast values
from 0.9 to 16.7% @70kVp 1mm Cu, 8mm diameter.
4. Resolution : 0.5 to 5.0 Line pairs/mm
5. Geometry and collimation check markings.
** Specification **
1. Dimensions : 220 x 190 mm
2. Thickness 10 mm
고객의 요구에 따라 다른 FOV 사이즈와 다양한 디자인으로 공급할 수 있습니다.
** 납품 시 구성품**
1. 1mm high purity Cu attenuation filter for fitting to the diaphragm housing
2. Detailed user manual
3. Robust carrying case for easy transport.
** 규정 준수 **
1. IEC 61223-3-1
2. IPEM Report 91(2005) : Recommended standards for the Routine Performance Testing of Diagnostic X-ray imaging Systems
Published by the Institute of Physics and Engineering In Medicine.
Model : PURE. F4
* 이 팬톰은 간단하면서 사용하기에 효율적인 rountine medical imaging test phantom 입니다.
* Digital and conventional 투시 시스템의 imaging performance 를 평가하기 위해 일상적으로 사용됩니다.
* 기준선(baseline)을 확인만 하면 됩니다.
* 이러한 숫자들이 평상시와 달라지면 투시 장비의 이미지 질에 이상이 생겼음을 알수 있습니다.
** 아래 항목을 평가 합니다. **
1. Beam alignment and collimation
2. Spatial resolution
3. Dynamic range(Different thickness Cu steps each with a central 4.0 mm diamenter detail, depth 2.5mm)
4. Contrast resolution 10 mm diameter details ranging from depths 0.4 to 4.0 mm
5. Homogeneity
** Specification **
1. Dimensions : 300 x 300 x 19 mm
2. Thickness 10 mm
고객의 요구에 따라 다른 FOV 사이즈와 다양한 디자인으로 공급할 수 있습니다.
** 납품 시 구성품**
1. Detailed user manual
2. Robust carrying case for easy transport.
** 규정 준수 **
1. DIN 6868-4
2. DIN 6868-150
Model : PURE. DIGITAL-RAD
* 이 팬톰은 간단하면서 사용하기에 효율적인 rountine medical imaging test phantom 입니다.
* Digital radiography 시스템의 imaging performance 를 평가하기 위해 일상적으로 사용됩니다.
* 단순히 설정된 결과의 기준선(baseline)을 따르기만 하면 됩니다.
* 이러한 숫자들이 평상시와 달라지면 엑스선 장비의 이미지 질에 이상이 생겼음을 알수 있습니다.
* 이팬톰은 PMMA. Copper attenuators 또는 알루미늄 attenuators 와 같이 사용해야 합니다. 별도로 판매하고 있습니다.
** 아래 항목을 평가 합니다. **
1. Beam alignment and collimation.
2. Position and size of radiation field.
3. Radiopaque cassette size alignment markers
4. Spatial resolution(0.6 ~ 5.0 line pairs/mm)
5. Low contrast resolution details(6,15mm diameter details)
6. Dynamic range with a Copper stepwedge
7. Homogeneity
** Specification **
1. Dimensions : 310 x 310 x 12 mm
2. Including a copper plate sandwiched between the PMMA layers
고객의 요구에 따라 다른 FOV 사이즈와 다양한 디자인으로 공급할 수 있습니다.
** 납품 시 구성품**
1. Detailed user manual
2. Robust carrying case for easy transport.
** 규정 준수 **
1. DIN 6868-13
2. DIN 6868/58
Model : PURE. CDR
* 이 팬톰은 간단하면서 사용하기에 효율적인 rountine medical imaging test phantom 입니다.
* 투시 시스템의 imaging performance 를 평가하기 위해 일상적으로 사용됩니다.
* Gray-scale을 체크하거나, Contrast detail의 수를 카운트하거나 line pattern을 확인만 하면 됩니다.
* 이러한 숫자들이 평상시와 달라지면 투시 장비의 이미지 질에 이상이 생겼음을 알수 있습니다.
** 아래 항목을 평가 합니다. **
1. Brightness and contrast adjustment : Cu for high light & Pb for low light details.
2. Circular Geometry check : scanning linearity.
3. Imaging contrast : 17 low-contrast and high-contrast details with contrast values from 0.2 to 7.2 % @70kVp for
high contrast 1mm Cu, 11mm diameter.
4. Resolution : 0.5 to 14.3 Line pairs/mm
5. Geometry and collimation check markings.
** Specification **
1. Diameter : 180 mm
2. Thickness 10 mm
고객의 요구에 따라 다른 FOV 사이즈와 다양한 디자인으로 공급할 수 있습니다.
** 납품 시 구성품**
1. 1mm high purity Cu attenuation filter for fitting to the diaphragm housing
2. Detailed user manual
3. Robust carrying case for easy transport.
** 규정 준수 **
1. IEC 61223-3-1
2. IPEM Report 91(2005) : Recommended standards for the Routine Performance Testing of Diagnostic X-ray imaging Systems
Published by the Institute of Physics and Engineering In Medicine.
Model : RESMESH
* 이 팬톰은 간단하면서 사용하기에 효율적인 rountine medical imaging test phantom 입니다.
* 투시 시스템의 imaging performance 를 평가하기 위해 일상적으로 사용됩니다.
* Mesh pattern details 만 확인만 하면 됩니다.
* 이러한 숫자들이 평상시와 달라지면 투시 장비의 이미지 질에 이상이 생겼음을 알수 있습니다.
** Specification **
1. Diameter : 180 x 180 x 10 mm
2. Resolution meshes available : 16 to 60 lines / inch, 30 to 100 lines / inch & 60 to 150 lines/ inch
** 납품 시 구성품**
1. Detailed user manual
2. Robust carrying case for easy transport.
** 규정 준수 **
1. IEC 61223-3-1
Model : PMMA stack
* Radiography 시스템의 AEC 를 테스트하기 위한 PMMA plate 입니다.
** Specification **
1. Diameter : 240 x 240 mm
2. Thickness : 9 x 20 mm, 1 x 10 mm, 2 x 5 mm
고객의 요구에 따라 다양한 두께의 PMMA 를 공급할 수 있습니다.
** 납품 시 구성품**
1. Robust carrying case
** 규정 준수 **
1. IEC 61223-3-1
Model : AlUMINIUM ATTENUATOR
* 환자 등가(두께) attenuator 입니다.
* 일반적인 Radiography 이미징 시스템의 성능 평가때 사용됩니다.
** Specification **
1. Dimensions of Aluminium block : 153 x 153 x 21mm
2. Dimensions of Mounting plate : 168 x 175 x 2mm
고객의 요구에 따라 다른 FOV 사이즈가 있는 다양한 디자인의 제품을 공급할 수 있습니다.
** 납품 시 구성품**
1. Robust carrying case
** 규정 준수 **
1. IEC 61267
2. DIN 6868-4
Model : ATTENUATION FILTERS
* 고순도의 Copper, Aluminium 그리고 Lead 필터를 구비하고 있습니다.
** Specification **
1. 150 x 150 x 1 mm
고객의 요구에 따라 다양한 사이즈의 필터를 공급 가능합니다.
Model : PMMA & CU ATTENUATOR
** Specification:**
1. Dimensions : 200 x 200 mm
2. Thickness : 30mm PMMA & 1mm Cu of 99.9 purity
고객의 요구에 따라 다양한 두께와 크기의 PMMA & Cu 를 공급합니다.
** 납품 시 구성품**
1. Robust carrying case
** 규정 준수 **
1. IEC 61223-3-1
Model : Al 11 stepwedge
* 고순도의 알루미늄 11 단 스텝웹지 입니다.
* 투시 장비(dynamic 또는 screen ststems) 와 Radiography 를 평가하기 위한 제품입니다.
* The 11 steps range from 3mm to 12mm high
* Dimensions : 60 mm x 20 mm
고객의 요구에 따라 다양한 사이즈의 step-wedge 를 공급할 수 있습니다.
** 규정 준수 **
1. IEC 61223 - 3- 1
Model : Al 21 stepwedge
* 고순도의 알루미늄 21 단 Stepwedge 입니다.
* 투시 장비(dynamic 또는 screen ststems) 와 Radiography 를 평가하기 위한 제품입니다.
* The 21 steps range from 3mm to 12mm high
* Dimensions : 230 x 110 x 30.5 mm
고객의 요구에 따라 다양한 사이즈의 step-wedge 를 공급할 수 있습니다.
** 규정 준수 **
1. IEC 61223 - 3- 1
Model : PURE HVL FILTERS
* 반가층을 측정하기 위한 알루미늄 필터
** Specification **
1. Aluminium of purity : 99.5%
2. Dimensions : 100 x 100 mm
3. Thickness : 1x2mm, 2x1mm, 2x0.5mm, 1x0.25mm, 2x0.1mm
** 납품 시 구성품**
1. Detailed user manual
2. Robust carrying case
** 규정 준수 **
1. DIN EN 61223-3-2
2. IEC 60601-1-3