팬톰/QA TOOL
Radiography, Fluoroscopy,Mommo,CT,MRI 용 다양한 팬톰을 구비하고 있으며 또한 해상력 차트/디지털 팬톰 등 엑스선 기기의 품질관리를 위한 Tool 등이 있습니다.
QUART SP_dl
Model : QUART SP_dl
* CR / DR Image Quality Test Phantom
* DR / CR 과 Fluoroscopy 장비에 이르는 디지털 및 일반 엑스선 애플리케이션에서
QA/QC 루틴 테스트에 사용하도록 설계되었습니다.
* 엑스선 시스템의 이미지 질을 결정하기 위해 필요한 파라메타가 한번의 촬영으로 얻을 수 있습니다.
* IEC, DIN 6868-150 과 DIN 6868-4 뿐만 아니라 IPEM, ONORM, PN-EN 표준 과 AFSSAPS
규정을 준수합니다.
* 독특한 특징 : kV 안전성 테스트 - 2개의 물질이 팬톰 내에 들어가 있어 엑스선의 질을 확인 할 수 있습니다.
** Technical specifications **
1. Internal Filtration: 1.5mm standard compliant copper filtration,
17mm PMMA as tissue simulation
2. Dynamic step wedge : 17 steps, thickness 0 ~ 3.5mm
3. Low-Contrast resolution : 8 test objects(Aluminium; 0.4~4mm; Ø15mm),
17 additional test objects; 1 object per step(Ø 4mm)
4. High-contrast resolution: Line pair bar pattern(Type 38 / Pb 0.05 mm / 45º)
5. kV stability; Unique kV test object(Yb + Pb)
6. X-Ray Field alignment : Field size marking
7. Signal normalisatioin; Homogeneous area in phantom center
8. Vertical Positioning; Wire mount system available for tests of wall-mounted units
9. Size: 200 x 200 x 18.5mm
10. Large Fields; Extension available to provide a homogeneous surface and
field markings for formats up to 33cm x 33cm
** Parameters **
1. Spatial Resolution
2. Low-Contrast Resolution
3. Radiation Field Alignment
4. Image Homogeneity
5. Artefacts, Image Flaws, etc
6. Generator stability
7. Radiatioin Quality
8. Dose indicator
Model : DSA
* Digital Subtraction Angiography QA Test Phantom
* Type B sliding design 으로 subtraction angiography 애플리케이션에서
최고의 QC 포퍼먼스를 보입니다.
* 팬톰은 독특한 방식으로, 세로 슬라이딩 기법을 사용하여 테스트 이미지의 구조적
이동 아티팩트를 최소화합니다.
* 반면에, 다른 팬톰은 횡방향 강제 이동으로 이내 방생하는 아티팩트 한계를 초과할 수 있습니다.
* DIN 6868-4, DIN 6868-8, DIN 6868-150 및 IEC 61223-3-3을 준수합니다.
** Technical specifications **
1. Phantom main body : PMMA
2. Slider : PMMA
3. Vessel simulation : 4 aluminium strips
4. Distance : 10mm between stirps
5. Purity : 99.5%(guaranteed)
6. Thickness : 0.05 / 0.1 / 0.2 / 0.4 mm
7. Strip width : 10 mm
8. Tissue simulation : step wedge
9. 7 copper steps
10. steps 0.2 ~ 1.4mm
11. Logarithmic compression : 1 additional copper step
12 Remote : Pneumatic control, Length 7m
** Parameters **
1. Dynamic range
2. Contrast sensitivity
3. Artefacts
4. Attenuation compression(Logarithmic compression)
5. Visual spatial resolution(in combination with type 38 line pair test pattern)
6. Test pattern properties : 45º / 0.05 mm Pb / 20 line pair groups / 0.6 ~ 5.0 Lp/mm